304 316 310 Hot Cold Rolled 2B Surface Stainless Steel Plate Stainless Steel Sheet
Product Advantages
1.Environmental protection: can effectively reduce environmental pollution.
2.Corrosion resistance: Strong anti-fouling, acid, corrosion, wear resistance, non-radioactive.
3.Surface cleanliness: The product surface is smooth and compact, not easy to be polluted by dust, and has good self-cleanlines
4.Easy Maintenance: A slight loss is easy to repair.
Products Description
|
|
201/202/301/303/304/304L/316/316L/321/309S/310S/401/409/410/410S/420/420J1/420J2/430/439/443/444/2205/2507/2020/253MA/904L
|
|
|
2B, BA, NO.1, NO.4, 8K, HL, Embossing, Satin, Mirror, brush, ect
|
|
|
JIS/SUS/GB/DIN/ASTM/AISI/EN
|
|
|
Cold Rolled; Hot Rolled
|
|
|
0.3-4mm cold rolled; 3-16mm hot rolled; 16-100mm hot rolled; Customized according to customer requirements
|
|
|
1000mm, 1219mm, 1240mm, 1500mm, 1800mm, 2000mm,or as required
|
|
|
2000mm, 2438mm, 2500mm, 3000mm, 6000mm or as required
|
|
|
Interior/Exterior decoration; Architectur; Evevator; Kitchen; Ceiling; Cabinet; Advertising nameplate; Roof structure;
Shipbuilding
|
|
|
7-15 working days after the receipt of 30% deposit
|
|
|
TT/LC
|
|
|
FOB, EXW, CIF, CFR
|
|
|
Wooden Pallet or according to customer's requirement
|
| Surface |
Characteristic |
Summary of Manufacturing Method |
Application |
| NO.1 |
Silvery white |
Hot rolled to specified thickness |
Do not need to have a glossy surface use |
| lackluster |
| NO.2D |
Silvery white |
After cold rolling, heat treatment and pickling are carried out |
General material, deep material |
| NO.2B |
Gloss is stronger than No.2D |
After No.2D treatment, the final light cold rolling is carried out through the polishing roller |
The general material |
| BA |
As bright as a sixpence |
No standard, but usually a bright annealed surface with high reflectivity. |
Building materials, kitchen utensils |
| NO.3 |
Rough lapping |
Grind with 100~200# (unit) strop tape |
Building materials, kitchen utensils |
| NO.4 |
Intermediate grinding |
Polished surface obtained by grinding with 150~180# strop abrasive tape |
Building materials, kitchen utensils |
| NO.240 |
Fine lapping |
Grinding with 240# strop abrasive tape |
kitchenware |
| NO.320 |
Very fine grinding |
Grinding was carried out with 320# strop abrasive tape |
kitchenware |
| NO.400 |
The luster is close to BA |
Use 400# polishing wheel to grind |
General timber, building timber, kitchen appliances |
| HL |
Hairline grinding |
Suitable particle material for hair stripe grinding (150~240#) with many grains |
Building, construction material |
| NO.7 |
It's close to mirror grinding |
Use a 600# rotary polishing wheel to grind |
For art or decoration |
| NO.8 |
Mirror ultrafinish |
The mirror is ground with a polishing wheel |
Reflector, for decoration |
Carbon (C) : 1. Improve the deformation resistance and tensile strength of the blade;2. Enhance hardness and improve wear resistance.
Cr (Cr) : 1. Enhance hardness, tensile strength and toughness;2. Anti-wear and corrosion.
Cobalt (CO) : 1. Increase the hardness and strength so that it can withstand high temperature quenching;2. Used to enhance certain individual properties of other elements in more complex alloys.
Copper (Cu) : 1. Enhance corrosion resistance;2. Enhance wear resistance.
Manganese (Mn) : 1. Increase the quenchability, wear resistance and tensile strength;2. Removal of oxygen from molten metal by separate oxidation and separate vaporization;3. When added in large quantities, the hardness is enhanced, but the brittleness is improved.
Molybdenum (Mo) : 1. Enhanced strength, hardness, quenchability and toughness;2. Improve machinability and corrosion resistance.
Nickel (Ni) : 1. Enhance strength, hardness and corrosion resistance.
Phosphorus (P) : Enhanced strength, machinability and hardness.
2. When the concentration is too large, it is easy to crack
Silicon (Si) : 1. enhanced ductility;2. Increase the tensile strength;3. Removal of oxygen from molten metal by separate oxidation and separate vaporization.
Sulphur (S) : small amount used to improve machinability.
Tungsten (W) : Increases strength, hardness and toughness.
Vanadium (V) : Increases strength, hardness and seismic resistance.
Q1.Do you have MOQ?
Depends on different ideas, Can be negotiated.The larger the quantity is, the competitive the unit price will be.
Q2.Should the customer pay the delivery fee,How much is it?
For the delivery fee,many samples are be requested to be sent,so we must get delivery fee. If you tell me to use the appointed Express,you will give me your express account or you will pay according to the Express. If you do not request,I will choose a cheap one in China.
Q3.How about the after sale service?
1)We will always keep the quality the same as the buyer's samples and if there is something with the quality,we will make compensation for our customers.
2)We will suggest our packing and take charge in our packing,we will keep the goods safe in the delivery.
3)We will trace the goods from the production to selling,we will solve the problems in the selling for our customers.
Q4.When can I get a price?
We usually quote within 24 hours after we get your inquiry.
